Information about Dylon Whyte's Art of Chainmail Tutorial - Garter Belt
Welcome to the information page for Dylon Whyte's Art of Chainmail Tutorial: Original Chain Pattern: Garter Belt!
Each Art of Chainmail tutorial was designed and tested with stainless steel jump rings circa 2008 - 2010 in 16ga, 18ga and sometimes 20ga sizes. Below is a chart of suggested alternate jump ring sizes and materials.
|16ga Jump Rings||Large||Medium||Small|
|Bright Aluminum||7/16" id||5/16" id||3/16"id (18ga)|
|Copper (pure)||7/16" id||5/16" id||13/64"id (18ga)|
|Stainless Steel||7/16" id||5/16" id||3/16"id (18ga)|
|18ga Jump Rings||Large||Medium||Small|
|Bright Aluminum||5/16" id||15/64" id||5/32" id (20ga)|
|Stainless Steel||5/16" id||15/64" id||5/32" id (20ga)|
NOTE: The preceding is provided as an informational convenience only. Every effort has been made to ensure accuracy. However, due to changes and variance in materials and manufacturing Dylon Whyte and The Art of Chainmail are unable to warrant compatibility.
Please speak with the customer service department of your jump link supplier if your are unsure about pattern compatibility or have questions regarding a specific project. Especially when combining two or more jump link materials.
All Content from this website is Copyright © 1998 - 2012 by Mr. Whyte
Reproduction is strictly forbidden without permission.